|
LR-PS-HX
1. 全自动数控绕簧机头/Servo controlled coiling head
2. 可以生产沙漏型、金字塔型、PPS型等各种弹簧（需定制）
Available for springs in hour-glass shape, pyramid shape, PPS type and so on(special option, if desired)
2. 可以生产沙漏型、金字塔型、PPS型等各种弹簧（需定制）
Available for springs in hour-glass shape, pyramid shape, PPS type and so on(special option, if desired)
袋袋弹簧生产机LR-PS-HX
所有尺寸可按照客户要求定制 70只/分钟
All practical sizes are possible 70springs/min.
性能/Character
| 型号/model | LR-PS-HX | |
|---|---|---|
| 生产效率 | 70只/分钟 | |
| Production capacity | 70spings/min. | |
| 绕簧机 | 1个数控绕簧机头 | |
| Coiling head | One servo coiling head | |
| 控制原理 | 伺服控制 | |
| Working principle | Servo control | |
| 弹簧形状 |
标配机型：直筒型和鼓型 定制机型：沙漏型、金字塔型、密圈型等 | |
| Spring shape |
Standard versions: barreland cylindrical Customized versions: hour-glass shape, pyramid shape, pps shape and so on. | |
| 气源需求/Air consumption | 约/Approx. 0.6m³/min. | |
| 工作气压/Air pressure | 0.6-0.7mpa | |
| 总功率/Power consumption in total | 约/Approx. 23KW | |
| 输入电源需求 | 电压/Voltage | 3AC 380V |
| 频率/Frequency | 50/60Hz | |
| Power requirements | 输入电流/Input current | 35A |
| 输入电缆/Cable section | 3*10mm²+2*6mm² | |
| 工作温度/Working temperature | +5°C-+35°C | |
| 重量/Weight | 约/Approx. 3200K | |
| 耗材参数 | |
|---|---|
| 无纺布/Non-woven fabric | |
| 布料厚度/Fabric density | 65-90g/m² |
| 布料宽度/Fabric width | 220-600mm |
| 布辊内径/Inner dia. of fabric roll | 最小/Min.60mm |
| 布辊外径/Outer dia. of fabric roll | 最大/Max.600mm |
| 钢丝/Steel wire | |
| 钢丝直径/Wire diameter | 1.4-2.2mm |
| 钢丝卷内径/Inner dia. of wire roll | 最小/Min.320mm |
| 钢丝卷外径/Outer dia. of wire roll | 最大/Max.1000mm |
| 钢丝卷重量/Acceptable weight of wire roll | 最大/Max.800kg |
| 生产规格（毫米）/Working range(mm) | |||
|---|---|---|---|
|
钢丝直径（W） Wire Diameter |
弹簧中腰直径（D） Spring Waist Diameter |
弹簧入袋后高度（H） Pocket Spring Height | |
| Option-01 | Ø1.6-2.1 | Ø55-70 | 80-140 |
| Option-02 | Ø1.6-2.1 | Ø55-70 | 120-180 |
| Option-03 | Ø1.6-2.1 | Ø60-75 | 80-140 |
| Option-04 | Ø1.6-2.1 | Ø60-75 | 80-140 |
| Option-05 | Ø1.6-2.1 | Ø60-75 | 140-200 |
| Special-01 | Ø1.3-1.6 | Ø45-55 | 70-120 |
| Special-02 | Ø1.3-1.6 | Ø45-55 | 120-180 |
| Special-03 | Ø1.0-1.4 | Ø37-45 | 120-160 |
| Special-04 | Ø1.6-2.1 | Ø50-60 | 180-230 |
| Special-05 | Ø1.6-2.1 | Ø60-70 | 180-230 |
| Special-06 | Ø1.6-2.1 | Ø50-60 | 220-260 |
| Special-07 | Ø1.6-2.1 | Ø60-70 | 220-260 |
| Special-08 | Ø1.0-1.5 | Ø30-35 | 45-70 |
| Special-09 | Ø1.0-1.4 | Ø28-30 | 120-150 |
| Special-10 | Ø1.-2.4 | Ø60-80 | 200-300 |
